[Composite Decking Installers Newcastle]

New installs

New composite decks, fitted to the maker's guide

Composite boards come with an installation guide for a reason. We follow it on every deck: the frame, the spacing, the gaps and the airflow. New decks from £1,800 fitted.*

*Guide prices only, not a quote or offer. Your price depends on size, height, access and the board range you choose.

Get a quoteOur fitting standard

A newly fitted mid-grey composite deck in a terraced back yard with straight, even board lines
Fig. 0A newly fitted mid-grey composite deck in a terraced back yard with straight, even board lines

Sequence

How we build

  1. Step 01

    Survey

    Levels, ground, drainage, access, and where water needs to go.

  2. Step 02

    Base

    Firm footings or bearers, membrane to stop weeds, and room for air underneath.

  3. Step 03

    Frame

    Treated joists at the maker's centres, blocking, joist tape and a slight fall.

  4. Step 04

    Boards

    The maker's clips and gaps, end gaps for the season, and a clean border.

  5. Step 05

    Finish

    Fascia on supports, steps, any trims, and a walk-round with care notes.

Why it matters

The bit you won't see is the bit that counts

Once the boards are on, nobody sees the frame again. That's why we photograph it before the boards go on, and send you the photos with your handover notes.

Treated timber deck frame with joist tape, being measured for joist spacing before boards go on
Fig. 1Checking joist centres against the board maker's figure before any boards go on

Section 3

Get a quote for a new deck

Install enquiry

Get a composite decking quote

Part A is the deck, part B is you.

Deck size, roughly
Height off the ground
What's there now
Board colour
Also needed? (optional)

No charge, no obligation. By sending, you agree we can contact you about your enquiry by phone, text, WhatsApp or email. You can change how we contact you at any time. Privacy notice.

Q&A

Questions

Q1Which boards do you fit?

We fit boards from established makers and follow each maker's own guide. If you've already chosen a range, tell us and we'll check the fitting requirements.

Q2Can you fit boards I've bought myself?

Yes, if they're a recognised range with a published installation guide. We'll check the quantities and the fixings before we start.

Send photos